Flanged Type Thermowells are available in
Screwed, Lap-Joint, Weld-Neck, Blind, and Slip-On Styles.
Thermometrics Corporation temperatures sensors
Screwed thermowells manufactured from bar stock are available in three common configurations. Straight, tapered and stepped.
Thermometrics Corporation Sensors and Flanges
This thermowell can be configured to your dimensional requirements or it may be purchased off the shelf with 304 stainless steel, a 3/4" N.P.T. thread, a .260" bore and an immersion "U" of 4.5".
You can also add a lagging extension.
"U" dimensions from 0.5" to >20" are available.
webpage is copywrited
Sanitary thermowells are available to meet your process requirements.They are manufactured from 300 stainless steel with a carbon content not exceeding 0.08 percent. The product contact surface finish off No. 4 meets the 3-A standards for Instrument Fittings and Connections.
Tapered thermowells are now the standard type used by most industries. They provide a higher natural frequency than straight or stepped, thus permitting operation at a higher fluid velocity and providing a fast response time.
Pressure ratings available include;
temperature sensor manufacturer
150LB Flange, 300LB Flanges, 600LB flange, 900LB flanges, 1500LB flange, 2500LB flanges.
tantalum flange manufacturer
Flange Thermowells are manufactured with various facings, depending on the application and service pressure / temperature. The following are common examples that are available;
This webpage is copywrited
Raised face--Ring-type joint--Flat face--Male/female--Tongue/groove.
Thermometrics Corporation manufacturer
Flange dimensions are governed by many different standards. Depending on your application, one or more of the following may apply to your process;
temperature sensor manufacturer, Northridge California
Give us a call today to meet your temperature measurment requirements for thermowells
This webpage is copywrited by Thermometrics Corporation, a temperature sensor manufacturer
Straight and stepped thermowells were at one time cheaper to manufacture than the tapered version. Now, with the advances in computerized milling machines, the cost savings have evaporated.
This webpage is copywrited by Thermometrics Corporation, a temperature sensor ................
304 stainless steel is used to provide good corrosion resistance and a temperature range up to 899°C (1650°F).
temperature sensor manufacturer
Note: When ordering a customized thermowell, specify the type of thermowell desired, "U" length, overall length, material type, and type of flange, size, pressure ratings, if applicable. Inconel, various Stainless Steels, and Carbon Steel are also available.
This webpage is copywrited by Thermometrics Corporation
When ordering, specify the type of thermowell desired, "U" length, overall length, material type, and type of flange, size, pressure ratings, if applicable.
Inconel, various Stainless Steels, and Carbon Steel are available.
This webpage is copywrited by Thermometric Corporation
Thermometrics specializes in Tantalum protected wells and flanges.
Tantalum is a brittle, lustrous hard, heavy, grey metal. Tantalum is used in alloys having high melting points, high strength & good ductility, in nuclear reactors, in aircraft and missile parts.
When purchasing a thermowell covered by a specific code, an engineering report is used to determine the optimum configuration. For high pressure, high temperature, boiler pressure vessel code, or industry specific code work, it is recommended that an engineering report is approved by the applicable regulating authority. In order to realize these capabilities, the purchaser must have specific process information available for our engineering staff.
The minimum information required is the maximum operating pressure, temperature range, fluid velocity, and specific volume of the process fluid. With this information a report can be generated to design the optimum thermowell for your application.
The assembly pictured above includes a 100 Platinum Resistance Thermometer and an Aluminum head and sanitary service flanged thermowell. This sensor may be ordered to meet your dimensional requirements with our Java Script form, or you may print a copy of our form above, fill it out and fax if to our sales department. Temperature sensors with sanitary service flanges are in use today in cities near you.